Cold spray plastic "Start SS+"

Cold spray plastics "Start SS+" - intended for horizontal marking of roads with asphalt concrete and cement concrete pavement, the thickness of the coating is 1.5 mm.

The materials have high durability, resistance to pollution, chemicals and de-icing product.

COLD SPRAY PLASTICS "Start SS+" is MADE FOR the MARKER WITH the MIXING SYSTEM 100:2; 50:50.

Applied with special equipment according to instructions manufacturer's material and instructions on marking technique. Do not contain organic solvents.

MAIN TECHNICAL CHARACTERISTICS OF COLD SPRAY PLASTIC "START CP" (THE SYSTEM OF MIXING 100:2; 50:50):

Feature

The value

Hardener

A liquid solution of benzoyl peroxide

The amount of curing agent, %

1-2

Luminance factor, %, not less (white)

80

Conditional viscosity by viscometer VZ-246 with nozzle diameter 4 mm at a temperature of 20±2°C

170-200

Color

White, yellow, red

Survivability, min, at 20°C

3-5

Curing time at 20°C for to min.

10

Density, g/cm3

1,64

Permissible surface temperature of the fabric when applied, °C:

For asphalt concrete

5-35

For cement concrete

10-35

The moisture content of the coating, not exceeding, %

4

Consumption, kg/m2

2,0-3,5

Garanthe party shelf life, months.

6

Lifetime warranty (subject to application technology), month, not less than

7

Packaging

Metal buckets at 28 kg each
hardener in cans of 25 kg each

At the request of manufacturers of hardeners, liquid hardeners are supplied only in containers of the manufacturer (in 25-litre plastic cans) and other containers are not packaged.

Certificates

Order
Request a call back
Thank you, your request has been accepted